Cart (0)

Your cart is empty.

35% Off Dies

Use code FALL35.

20% Off Machines

Includes Starter Sets & Super Starter Sets. Use code MACHINE20.

Take up to 60% off

Select overstock dies while quantities last.

MARK 5 and MARK IV Roller/Tray Kit
Move your mouse over image or click to enlarge
MARK 5 and MARK IV Roller/Tray Kit

MARK 5 and MARK IV Roller/Tray Kit

| Write a Review

Regular price $145.00 Sale

The MARK 5 Die-Cutting Machine and retired MARK IV Machine require periodic replacement of the roller and die tray. These items last about one year with average use.... MORE
Earn AccuCut Rewards when you order online!
You could earn 10 Reward Points for writing a review.

The MARK 5 Die-Cutting Machine and retired MARK IV Machine require periodic replacement of the roller and die tray. These items last about one year with average use. With heavy use, they may need to be replaced more often. You will know the die tray needs to be replaced when it does not lay flat on a table, if tray center bows in either direction or when you are not able to cut as many layers as expected. You may even hear a "popping" noise when cutting. The roller wears down with use and needs to be replaced when the roller turns white and cutting performance is diminished.

Replacement Instructions

Step 1
Facing the back of the machine, remove the roller safety guard and set aside. The MARK 5 has a steel safety guard, and the MARK IV has a plastic safety guard.

Step 2
Still facing the back of the machine (the side WITHOUT the handle), remove the two screws then take off and set aside the cover plate. The MARK 5 Machine has easy-to-remove screws that are removable by hand.

Step 3
Pull out the roller and discard it. You will know it’s
time to change the roller when it turns white or gray.

Step 4
Find the end of the roller with the open channel and slide that end into the machine first. Rotate roller until it locks into place and the handle turns with the roller.

Step 5
Replace cover plate, screws and safety guard.

Warning: Safety guard must be in place during operation. Keep hands and fingers clear of roller
or serious bodily injury can occur.

Savings You save $10 when you buy a roller and tray together.
Additional Info

To extend the life of the die tray, move dies to different locations each time you cut so one corner of the die is always touching a side of the tray. Also make sure to keep scraps of paper and chipboard out of the die tray. Rolling a die through while it is on top of scrap material, or purposely shimming under a die, causes the blades to push through back of die.

Customer Reviews

Based on 3 reviews Write a Review

Shipping and Delivery

Shipping and Delivery Times (U.S. Only)
Most orders ship within 7 to 10 business days. Once your order leaves our warehouse, standard delivery to U.S. addresses takes approximately 3 to 6 business days. While most orders are delivered within the specified timeframe, some destinations may take longer. You will receive an e-mail with tracking information when your order ships.

Standard Delivery Shipping Charges
Our Standard Delivery shipping charges shown below are based on the total value of merchandise (before any discounts) shipped to an address. All shipping charges include handling, order processing, packaging and transportation of items. AccuCut uses FedEx and USPS to ship its orders.

Delivery to Contiguous United States

Total Cost of Items Shipping Charge

Up to $99.99


$100 - $199.99


$200 - $499.99


$500 and more


FREE SHIPPING for online orders shipping to the U.S. when you spend $200 or more after any discounts. Excludes Alaska, Hawaii and Puerto Rico. Minimum does not include tax.


Delivery to Non-Contiguous States will be calculated at checkout.

Rush Delivery
Expedited shipping via FedEx is not available online although it can be requested by contacting customer service. Rates are determined by the weight of your order. Please note that most of our dies are not available in inventory and it takes 5-7 days to produce your die(s) before they are able to ship. Machines and accessory items are generally in stock and are able to ship the same day if you contact us prior to noon CST. To find out stock status of your desired item please contact us to place your order.

APO/FPO Delivery
To place an order to be shipped to an APO/FPO address,
please contact us.

International Delivery
AccuCut orders can be shipped to most international addresses. You may place your order online and choose from various FedEx and USPS shipping methods. You may also e-mail your order to or call 800-288-1670 or 402-934-1070 to place your order.

Please note: International shipping costs do not include duty, taxes or brokerage fees.




Liquid error (layout/theme line 353): Could not find asset snippets/spurit_uev-theme-snippet.liquid