Your cart is empty.
Who knew face masks could be both stylish and useful? Make your own face covers for a surgical mask with your favorite pattern and then wear it to... MORE
Earn AccuCut Rewards when you order online!
You could earn 10 Reward Points for writing a review.
Who knew face masks could be both stylish and useful? Make your own face covers for a surgical mask with your favorite pattern and then wear it to help reduce the chances of bacteria spreading. Even though this mask cover can’t stop germs 100% of the time, you can still say ‘hello’ to staying healthy and ‘see ya later’ to not getting sick.
*Please note that the CDC does not consider homemade masks personal protective equipment (PPE) and will only be used by professionals as mask covers or when no other alternative is available.
If you need size or design modifications to this shape, want to create your own design, or need this design to be compatible with a different machine, please contact Custom Shape Pros.
Step 1
Cut two of the larger rectangles from both types of fabric, one rectangle of each fabric will be used per mask.
Step 2
Pin three 1" folds/pleats on each side of the mask. Make sure the tucks/pleats are all going in the same direction (the finished mask should be at least 3.5 inches in height and 6.75 inches in length when pleats are not expanded).
Step 3
Press pleats to hold.
Step 4
Place two pleated rectangles together, right sides facing.
Step 5
Place ends of tie straps in the corners between layers.
Step 6
Sew around the rectangle with 1/4" seam allowance leaving a 2-inch gap along with one of the long sides for turning. Reinforce corners and ensure tie straps are secure by sewing forward and backward at the corners.
Step 7
Turn the mask inside out and press flat, keeping 1/4" seam allowance pressed toward the inside of the mask at the opening.
Step 8
Sew around the edge of the mask twice to secure. the tucks and close the opening.
*Make sure to use ¼” seam allowance while sewing.
| Die Type | Standard |
|---|---|
| Die Construction | Steel-Rule Die (.937"): Birch Wood, Steel-Rule Blade and Ejection Foam. Made in the USA. Use with your GrandeMARK 2 or Studio 2 Die-Cutting Machine. |
| Number of Dies | 1 |
| Design Dimensions | 9" W x 6" H, 9" W x 1" H *Flat Dimensions |
| Compatible Machines | AccuCut GrandeMARK 2 Die-Cutting Machine or AccuQuilt Studio 2 Die-Cutting Machine |
| Additional Info | For the main mask we recommend cotton, and the lining cotton or flannel. Prints are acceptable. (prewash) |
| Warranty | Three Years (Limited) |
| Designer | AccuCut |
Die Compatibility with AccuCut Machines
MARK 3Best for limited budgets or as an extra machine |
MARK 5Most popular machine for educators |
GrandeMARK 2Ultimate machine for precision and versatility |
|
| Mini, Small & Large |
|
|
|
| Long Cut |
|
|
|
| Extra Long Cut | with XLC Die Tray * |
|
|
| Jumbo, Little Jumbo |
|
|
|
| Super Jumbo |
|
|
|
| Giant, Big |
|
Die Compatibility
* Pinnovation dies may not be used and dies with crease blades or fold lines are not recommended.
Die Tips and Maintenance
- Use cutting plastic or mat (sold separately) that matches size of the die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Dies cut face up in AccuCut machines so it's easy to see what you're cutting.
- Place desired side of paper or other material face down on foam side of die.
- If you are cutting fabric, a thread or two may remain where die blades meet. Snip threads with scissors.
- To extend life of die, clear scraps of paper, chipboard and other material from under the die when cutting.
- If desired, use adhesive roller to clean paper and lint from dies. Use die pick or tweezers to remove any material caught between blades and foam.
- Die blades never need to be sharpened.
If you need size or design modifications to this shape or want to create your own design, please contact Custom Shape Pros.
Shipping and Delivery
Shipping and Delivery Times (U.S. Only)
Most orders ship within 7 to 10 business days. Once your order leaves our warehouse, standard delivery to U.S. addresses takes approximately 3 to 6 business days. While most orders are delivered within the specified timeframe, some destinations may take longer. You will receive an e-mail with tracking information when your order ships.
Standard Delivery Shipping Charges
Our Standard Delivery shipping charges shown below are based on the total value of merchandise (before any discounts) shipped to an address. All shipping charges include handling, order processing, packaging and transportation of items. AccuCut uses FedEx and USPS to ship its orders.
Delivery to Contiguous United States
Total Cost of Items
Shipping Charge
Up to $99.99
$13
$100 - $199.99
$20
$200 - $499.99
FREE
$500 and more
FREE
FREE SHIPPING for online orders shipping to the U.S. when you spend $200 or more after any discounts. Excludes Alaska, Hawaii and Puerto Rico. Minimum does not include tax.
Delivery to Non-Contiguous States will be calculated at checkout.
Rush Delivery
Expedited shipping via FedEx is not available online although it can be requested by contacting customer service. Rates are determined by the weight of your order. Please note that most of our dies are not available in inventory and it takes 5-7 days to produce your die(s) before they are able to ship. Machines and accessory items are generally in stock and are able to ship the same day if you contact us prior to noon CST. To find out stock status of your desired item please contact us to place your order.
APO/FPO Delivery
To place an order to be shipped to an APO/FPO address,
please contact us.
International Delivery
AccuCut orders can be shipped to most international addresses. You may place your order online and choose from various FedEx and USPS shipping methods. You may also e-mail your order to info@accucut.com or call 800-288-1670 or 402-934-1070 to place your order.
Please note: International shipping costs do not include duty, taxes or brokerage fees.
![]()
Shipping and Delivery
Shipping and Delivery Times (U.S. Only)
Most orders ship within 7 to 10 business days. Once your order leaves our warehouse, standard delivery to U.S. addresses takes approximately 3 to 6 business days. While most orders are delivered within the specified timeframe, some destinations may take longer. You will receive an e-mail with tracking information when your order ships.
Standard Delivery Shipping Charges
Our Standard Delivery shipping charges shown below are based on the total value of merchandise (before any discounts) shipped to an address. All shipping charges include handling, order processing, packaging and transportation of items. AccuCut uses FedEx and USPS to ship its orders.
Delivery to Contiguous United States
| Total Cost of Items | Shipping Charge |
|
Up to $99.99 |
$13 |
|
$100 - $199.99 |
$20 |
|
$200 - $499.99 |
FREE |
|
$500 and more |
FREE |
FREE SHIPPING for online orders shipping to the U.S. when you spend $200 or more after any discounts. Excludes Alaska, Hawaii and Puerto Rico. Minimum does not include tax.
Delivery to Non-Contiguous States will be calculated at checkout.
Rush Delivery
Expedited shipping via FedEx is not available online although it can be requested by contacting customer service. Rates are determined by the weight of your order. Please note that most of our dies are not available in inventory and it takes 5-7 days to produce your die(s) before they are able to ship. Machines and accessory items are generally in stock and are able to ship the same day if you contact us prior to noon CST. To find out stock status of your desired item please contact us to place your order.
APO/FPO Delivery
To place an order to be shipped to an APO/FPO address,
please contact us.
International Delivery
AccuCut orders can be shipped to most international addresses. You may place your order online and choose from various FedEx and USPS shipping methods. You may also e-mail your order to info@accucut.com or call 800-288-1670 or 402-934-1070 to place your order.
Please note: International shipping costs do not include duty, taxes or brokerage fees.